Extras; Battery Status Settings; Changing The Button Illumination Settings; Modifying The Sensor Settings - Honeywell Dolphin 75E User Manual

Hide thumbs Also See for Dolphin 75E:
Table of Contents

Advertisement

Extras

Battery Status Settings

For information on the checking the battery status, see

Changing the Button Illumination Settings

1. In the Apps list, touch Settings
2. Select button illumination.
3. Select one of the following options:
• Off
When selected, the button backlights are always turned Off.
• On with Backlights
When selected, the button backlights are always On, except when the terminal is in sleep mode.
• On with Backlight in Dark Environment
When selected, the button backlights turn on only when the terminal sensors indicate light levels have dropped to the
specified Brightness Threshold level. You can set the threshold to be between 0 and 999.

Modifying the Sensor Settings

To configure the integrated motion detection sensors for advanced power management:
1. In the Apps list, touch Settings
2. Select sensor settings.
3. Check the box for one or more of the following options:
• Low power mode on face down
When selected, the terminal automatically enters Sleep mode (Suspend mode) when placed face down on a flat
surface. By default this option is disabled
• Keep on when motion detected
When selected, the terminal is prevented from entering Sleep mode (Suspend mode) when motion is detected. By
default this option is disabled.
• Turn off display on face down
When selected, the terminal display is automatically turned off when placed face down on a flat surface. Once the
display turns off, the terminal enters sleep mode after 60 seconds. You can adjust the length of time between the
terminal display going off and entering sleep mode. By default this option is disabled.
• Turn off display on close proximity
When selected, the terminal display is automatically turned off when the sensors indicate something is in close
proximity to the face of the terminal. Once the display turns off, the terminal enters sleep mode after 60 seconds. You
adjust the length of time between the terminal display going off and entering sleep mode. By default this option is
disabled.
4. To edit the touch screen time out limit, touch the time increment, and then enter a new value. The default is 60 seconds.
For more information on Sleep mode, see

Modifying Wi-Fi Radio Settings

For information on setting up and changing the Wi-Fi settings, see
on page 6-3.
5 - 16
Checking the Battery Health
> Extras.
> Extras.
Turning Sleep Mode (Suspend Mode) On/Off
Advanced Wi-Fi Radio Settings and Security
on page
2-11.
on page
1-10.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dolphin 70e

Table of Contents