Note: CT40-L0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with Dolphin mobile computers for maximum performance and durability. Contact a Honeywell sales representative for...
Mobile Computer Features Imager Window Speaker (LED/Laser Aperture) Scan Status LED Microphone Battery Status/ Notification LED Power Button Touch Panel Scan Button Scan Button Speaker Microphone...
Note: Hand strap not shown. Laser Safety Label Location Camera Lens and Flash Volume Buttons Scan Button Battery Latch Card Door microSD Card Door I/O Connector Battery...
Install a microSD Card Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card.
Install a microSIM Card Note: Phone feature is only available on CT40-L1N models. SIM slot supports use of a UICC card for NFC Secure Element NFC link encryption on all models. Note: Always power off the computer before attempting to install or remove a card.
15.5 watt-hour battery manufactured for Honeywell International Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Ensure all components are dry prior to placing the battery in the computer. Mating wet components...
4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration bar code or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled).
Adjust the Display Sleep Time To adjust the amount of time before the display sleeps after inactivity: Touch > Settings > Display > Sleep. Select the amount of time before the display goes to sleep. Touch to return to the Home screen.
About the Home Screen Notification / Status Bar Search Bar Touch to initiate a voice search or command. Home Screen Panel Touch to access all apps. Favorites Tray Navigation Buttons To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Touch the front (on-screen) Scan button to trigger the scanner. Volume Press the top of the button to raise the speaker volume.
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a bar code to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Bar Code with the Scan Demo For optimum performance, avoid reflections by scanning the bar code at a slight angle.
Sync Data To move files between your CT40 and your computer: Connect the CT40 to your computer using a USB charge/ communication accessory. On the CT40, swipe down from the top of the screen to see the notifications panel. Select USB charging this device, and then choose either Transfer files or Transfer photos (PTP).
Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. Press and hold the Power button until the options menu appears.
Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.