Load A Certificate; Disable Or Remove Certificates - Honeywell Dolphin CH80 User Manual

Load a Certificate

To use a certificate, you must install it in the trusted credential storage on the
computer.
Note: Apps such as email and browsers that support certificates allow you to install
certificates directly from within the app. For more information, see the help that
comes with the app.
1. Copy the certificate or key store from your PC to the mobile computer.
2. Swipe up from the bottom of the Home screen to access all apps.
3. Tap Settings
4. Tap Install from storage. Navigate to the location where you saved the
5. Tap the certificate or key store to install it. If prompted, enter the key store
6. Select VPN and apps or Wi-Fi.
7. Enter a name for the certificate and tap OK.

Disable or Remove Certificates

If a user or system certificate is compromised, or your organization chooses not to
trust it, you can disable or remove the certificate.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the name of the certificate to you want to disable or remove. The Security
4. Scroll to the bottom of the screen and tap Disable (for System certificates) or
5. Tap OK.
Note: You can enable a disabled System certificate but if you remove a User certificate, you
must install it again to enable it.
Dolphin CN80 Mobile Computer
> Security.
certificate or key store.
password and tap OK.
> Security > Trusted credentials.
The trusted credentials screen has two tabs:
• System shows Certificate Authorities (CA) certificates permanently installed
on the computer. They can only be disabled.
• User shows CA certificates you have installed yourself. You can remove these
certificates.
certificate screen appears.
Remove (for User certificates).
73