Supermicro SuperServer E100-9S User Manual page 62

SuperServer E100-9S/-9S-E/-9S-L User's Manual
USB Support
Select Disabled for all USB devices to be unavailable until after the operating system boots,
Parital Initial for all USB devices to be unavailable before the operating system boots, and
Full Initial for all USB ports to be enabled during the POST. The options are Disabled, Full
Initial, and Partial Initial.
PS2 Device Support
Use this feature to disable or enable PS2 device support during boot up. The options are
Disabled and Enabled.
Network Stack Driver Support
Use this feature to disable or enable network stack driver support during boot up. The options
are Disabled and Enabled.
Redirection Support
Use this feature to disable or enable redirection support. The options are Disabled and
Enabled.
Boot mode select
Use this feature to select the boot mode for bootable devices in the system. The options are
LEGACY, UEFI, and DUAL.
Fixed Boot Order Priorities
This feature prioritizes the order of bootable devices that the system can boot from. Press
<Enter> on each entry from top to bottom to select devices.
•
Boot Option #1
•
Boot Option #2
•
Boot Option #3
•
Boot Option #4
•
Boot Option #5
•
Boot Option #6
•
Boot Option #7
•
Boot Option #8
•
Boot Option #9
•
Boot Option #10
62