Supermicro SuperServer E100-9S User Manual page 40

SuperServer E100-9S/-9S-E/-9S-L User's Manual
Panel Color Depth
Use this feature to select the LCD panel color depth. The options are 18 Bit and 24 Bit.
PCH-IO Configuration
PCH-IO Configuration
•
USB Module Version
•
USB Controllers
•
USB Devices
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled, and Auto.
XHCI Hand-off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The settings are Enabled and Disabled.
USB Mass Storage Driver Support
Select Enabled for USB mass storage device support. The options are Disabled and Enabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Disabled and Enabled.
USB hardware delays and time-outs:
USB transfer time-out
Use this feature to set the timeout value for Control, Bulk, and Interrupt transfers. The options
are 1 sec, 5 sec, 10 sec, and 20 sec.
Device reset time-out
Use this feature to set the timeout value for a USB mass storage device. The options are 10
sec, 20 sec, 30 sec, and 40 sec.
Device power-up delay
Use this feature to set the maximum time a device takes to report itself to the host controller.
The options are Auto and Manual.
40