Authentication; Optional Service - Samsung CLX-8380ND User Manual

Option

Authentication

Network
Mode Accounting
Foreign Device
Interface
Authentication No
Mode Authentication
Mode
(Continue)
Description
It enables the authentication
mode which is set from the Job
Account menu in the
SyncThru™ Web Admin
Service.
When you install the optional
FDI kit, select On to activate it.
• Job Timer: If there is not
enough credit, you can set the
machine to cancel a job right
away or wait a designated
amount of time for a deposit.
• Print Job Control: When it is
enabled, the both computer
printing and copying are
possible since the credit
remains. With Disable, copy
printing needs the credit.
However, when printing a
report or a fax, the credit is not
needed.
• Inhibit Services: When no
credit is left, the machine
disables the copy job only with
Copy Only. With All Service,
scanning service and copy job
are disabled.
• Internal Credits: It is used
when you cancel the job or
when the job is cancelled by
the device due to insufficient
credits (coin) or is canceled by
user's request. If you select
Enable, the machine deposits
a credit equal to the number
of sheets that did not print out
correctly, then it prints next job
for free (for the amount
deposited). With Disable,
even if you cancel the printing
job, the machine includes
jammed paper in the count
and the cost of printing shall
be recovered for the pages
already billed.
• Image Counter: Depends on
whether the machine counts
blank white pages.
It disables Authentication
Mode.
Option
Change Admin. Password

Optional Service

When you want to add the optional features for this machine, you have to
install the optional kit and then set the machine to enable and activate
those features. Follow the next steps to enable those features.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, then enter
password and press OK.
3 Press the Setup tab > Optional Service.
Option
Copy Enables or disables the Copy menu from the
main screen.
Analog Fax After installing the fax kit, select this option
Enable to use this machine as a fax machine.
Scan to Email Enables or disables the Scan to Email menu
from the scan screen.
NetScan Set Enable to activate the scanning and
sending it via network.
Scan to SMB Enables or disables the Scan to SMB option
from the scan screen.
Scan to FTP Enables or disables the Scan to FTP option
from the scan screen.
On Demand You can set the machine to delete previous job
Image Overwrite information on HDD as you store new job
information. Set this option to Enable, go to the
General tab > On Demand Overwrite, press
Start in the display to start the overwriting job.
Immediate Image If you select Enable, the machine renews the
Overwrite HDD memory when you save new job on it.
10.7
<Machine status and advanced setup>
Description
You can change the password
for the Admin Setting
authentication.
Description