Sending The Toner Reorder Notification; Checking Stored Documents; Cleaning Your Machine; Cleaning The Outside - Samsung CLX-8380ND User Manual

Sending the toner reorder notification

You can set the machine to alert you that the toner level is low and needs
to be reordered.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, then enter
password and press OK.
3 Press the General tab > Supplies Management > Toner Cartridge
Reorder Notification.
4 Press Toner Low Alert to enable this option not, and press Toner
Low Alert Level to set the remained life level.
5 Press OK.

Checking Stored Documents

The machine shows the document list of the print or fax job.
Press Stored Documents on the Main screen. If the screen displays an
other menu, press ( ) to go to the Main screen.
• Public tab: Shows the job list of delay print and store print job.
• Secured tab: Shows the job list of secure print, secure receive,
and secure store print job.
• User Name: Shows the user name who registered the job.
• File Name: Shows the job name which is registered as the job
information. For the computer printing, the file name shows.
• Date: Shows the date of the job registered.
• Page: Shows the total page number of the job.
• Detail: Pops the separate message showing the basic job
information with the file size, the paper size and the paper type, as
well.
• Edit: Lets you to modify the file name.
• Delete: Deletes the selected list.
• Delete All: Deletes the selected all list.
• Print: Prints the selected list. Select the number of printout in the
popup window.

Cleaning your machine

To maintain print and scan quality, follow the cleaning procedures below
each time the toner cartridge is replaced or if print and scan quality
problems occur.
Caution
• Cleaning the machine cabinet with cleaning materials that
contain large amounts of alcohol, solvent, or other strong
substances can discolor or damage the cabinet.
• If your machine or its surrounding is contaminated with toner,
we recommend you to use cloth or tissue dampened with
water to clean it. If you use a vacuum cleaner, toner blows in
the air and might be harmful to you.

Cleaning the outside

Clean the machine cabinet with a soft lint-free cloth. You can dampen the
cloth slightly with water, but be careful not to let any water drip onto or into
the machine.

Cleaning the inside

Contact a service representative to clean the inside of the machine.

Cleaning the scan unit

Keeping the scan unit clean helps ensure the best possible copies. We
suggest that you clean the scan unit at the start of each day and during
the day, as needed.
1 Slightly dampen a soft lint-free cloth or paper towel with water.
2 Open the scanner lid.
3 Wipe the surface of the scanner glass and DADF glass until it is
clean and dry.
4 Wipe the underside of the scanner lid and white sheet until it is
clean and dry.
5 Close the scanner lid.
11.2
<Maintenance>
Scanner lid
1
2 Scanner glass
3 White sheet
4 DADF glass