Deciding The Form Of Copy Output (Collated / Staple); Selecting The Type Of Originals; Changing The Darkness; Using Special Copy Features - Samsung CLX-8380ND User Manual

• Reverse 2 -> 2 Sided: Scans the both sides of originals and prints
them on both sides of a paper. But the machine reverses the print
out order of the originals. The machine prints the back sides of
originals first, which means the front sides of originals is printed on
the back side of a paper.

Deciding the form of copy output (Collated / Staple)

Press the Basic tab > Output, then use left/right arrows to select Collated or
Stapled. This feature is supported only when the original is on the DADF.
Note
If you want to copy originals on the scanner glass and copy both
sides of original, the message Another Page? appears after the
first page copied. At this time, load the original's the other side
facing down and press Yes, then the machine starts scanning
the second page of your original.
Press more to see the values.
• Collated: Prints output in sets to match the sequence of originals.
• Uncollated: Prints output sorted into stacks of individual pages.
• Staple, Portrait: Adds a single staple to all of your portrait-
oriented output.
• Staple, Landscape: Adds a single staple to all of your landscape-
oriented output.
Note
The Staple feature is available with an optional stacker &
stapler. (Page 13.1)

Selecting the type of originals

Press the Basic tab and select an appropriate original type.
• Text: Use for originals containing mostly text.
• Text/Photo: Use for originals with mixed text and photographs.
• Photo: Use when originals are photographs.
• Magazine: Use when originals are magazines.

Changing the darkness

This defines the degree of darkness. Use left/right arrows to change the
level of light/dark in the printouts.

Using special copy features

On the Advanced tab or the Image tab of the Copy screen, you can
select specific copy features.

ID card copying

The machine prints one side of the original on the upper half of the paper
and the other side on the lower half without reducing the size of the
original. This feature is helpful for copying a small-sized item, such as a
business card.
Note
The original must be placed on the scanner glass to use this
feature.
1 Place the front side of an original facing down on the scanner glass
where arrows indicate as shown, and close the scanner lid.
2 Press Copy from the Main screen.
3 Press the Advanced tab > ID Copy.
5.4
<Copying>