Understanding Display Messages - Samsung CLX-8380ND User Manual

4 Pull up on the stacker lever and then close the stacker front cover.
Paper jam at exit of finisher
1 Gently pull the paper out through the exit area.
2 Close the side cover. Printing automatically resumes.

Understanding display messages

Messages appear on the Smart Panel program window or on the control
panel display to indicate machine status or errors. Refer to the tables
below to understand the messages meaning to correct the problem, if
necessary. Messages and their explanations are listed in alphabetical
order.
Note
• If the message is not in the table, cycle the power and try
the printing job again. If the problem persists, call for service.
•When you call for service, it is very convenient to provide the
service representative with the contents of display message.
• Some messages may not appear in the display depending on
options or models.
• [xxx] indicates the part of the each toner cartridge or each
imaging unit.
• [yyy] indicates the part of the machine.
• [zzz] indicates the error code. When you contact the service
center, this error code help to handle the problem.
• You may see an exclamation mark (
on the upper left of the display, in that case, press the question
mark to browse detailed information on the supplies.
Message
[yyy] is worn.
The life of the part
expires totally.
Replace with new
one
[xxx] imaging unit The toner in the
is empty. Replace imaging unit has run
it out.
[xxx] imaging unit
The imaging unit you
is not compatible.
have installed is not
Check userís
for your machine.
guide
[xxx] imaging unit
The imaging unit is
is not installed.
not installed, or the
Install it
CRUM (Consumer
Replaceable Unit
Monitor) in the
cartridge is not
connected.
[xxx] imaging unit
The imaging unit is
is worn. Replace
at the end of its life.
with new one
When the imaging
unit replacement
message appears
on the screen and if
you select
Continue, this
message displays.
12.11
<Troubleshooting>
) or a cross mark (
Meaning Suggested solutions
Replace the part with
a new one. Call for
service.
Replace the imaging
unit with a Samsung-
genuine toner
cartridge.
Install a Samsung-
genuine imaging unit,
designed for your
machine.
Install the imaging
unit. If it is already
installed, try to
reinstall the imaging
unit.
If the problem
persists, please call
for service.
Replace a imaging
unit with a Samsung-
genuine imaging unit.
(Page 11.5)
)