Configuration; Programme Management; Configure System; Advanced Configuration - Fagor LA-11 Instruction Manual

4 CONFIGURATION

4.1 Programme management

If the washing machine is configured in self-service mode, only the first 16 programmes will be
available, the remaining programmes become available on entering Credit Mode.

4.2 Configure System

4.2.1

Advanced configuration


Credit Mode: If the washing machine is in self-service mode, the password for Credit Mode
(1234 by default) can be configured. Make a note of the password in a safe place. If you lose it,
please contact the technical support service.

HUD: In self-service mode, it is also possible to configure the Main screen (first and second
selection screens)

Beep: Option permitting the buzzer to be disabled. By default it is enabled.

RABC/Traceability: See advanced OPL configuration. In self-service mode, this should function
in the same way.

Grace Period: When this button is pressed, an intermediate screen is displayed from where it is
possible to activate or deactivate the grace period and edit the value between 1 and 99 minutes (the
default setting is enabled and 1 minute).

Self-service statistics: This provides data about payments and the number of times each of the
favourite programmes is run.
When the self-service statistics button is pressed, the following screen is displayed.
Press "TOTAL" to display the total values for the machine. If a date is entered, the statistics are only
shown for this period. Press "Reset" to set all the values to 0, resetting the statistics.

Currency: Select currency with which you wish to operate (see section 4.2.3.). If the currency is
changed, all the prices will be reset, by default to token.
and the
Run screen. (See section 2.).
EN
Page 37 of 43