Fagor LA-11 Instruction Manual page 40


Payment Method: There are 3 different modes for operating in self-service mode.

COIN: The currency and price of each programme must be configured, using the
coin slot pulses to enable a set programme to be run.

Central Payment: The washing machine receives a pulse from a payment centre to
release the washing machine and permit a programme to be run. Default setting.

The currency, price and price programming options are disabled.

Card reader: Same compartment as the "Central Payment" option. The currency,
price and price programming options are disabled.

Prices: The prices of all the selected programmes can be configured in "My Programmes". The
minimum value of the programme will be the multiple defined in the currency, and the maximum will
be 100 times the value of the multiple. The default setting is the minimum configurable value.

Price programming: In addition to the basic price configuration, it is possible to define a price
programming. That is, periods of specific time for which you wish to change the defined programme
price. Maximum, 10 simultaneous programmings.
The programmed prices are valid for the configured time slot. The prices return to the general prices
outside the configured time slot.
If there is a conflict between different programmings, the condition of the first plan will be applied. In
addition, plans can only be created from the current date.
On pressing "+" to create a new plan, these are the fields that must be completed when preparing a
programming:

Date: Time period in which programming is to be made.

Start/end time: Start and end time of the programming.

Programme(s) & Prices: Price or discount to be allocated to each of the existing
programmes in "My Programmes".
A set price can be allocated or a discount applied to the selected programmes.

Calendar: Within the selected time period, days on which the programming is to be
applied.

Import: In addition to entering the fields one by one, it is also possible to import an
existing plan from a USB memory stick.
If IMPORT is selected, the same screen as in programmes is displayed in order to
browse through the USB, but only plan files (with extension .plan) can be selected. It is
only possible to import one plan when importing.
On pressing OK and importing the plan, the display returns to the main window of price
plans.
EN
Page 38 of 43