Advertisement
The FIAM x1R electronic key functions very simply:
From outside the home, when you bring the TAG x.Key close to the read-
ing area located on the external plaque
you can access the interior. If the functioning criteria have been programmed
to do this, the door will be locked automatically when you close the door.
There are other options for exiting through the door:
• press the the green key located on the internal plaque (Fig. 5)
• press a remote button (optional) which can be located also remote from
the door (for example, the interphone key or an ordinary button)
• through the mechanical key
NOTE:
remember that the FIAM x1R electronic lock can function always and in any
case, including critical cases, from both outside and inside, with the aid of
the mechanical key, which can be transported inside the TAG.
FUNCTIONING METHODS
The functions and performances of the FIAM x1R electronic lock can be
programmed in five different modes:
Mode 1: when the command to open is given, the lock withdraws the
bolts and holds back the spring latch, giving access to the interior. Once it
has opened the lock and the door, the spring latch will be released. Later,
when the door is closed again, the lock will automatically shoot the bolts.
Mode 2: when the command to open is given, the lock withdraws the
bolts but not the spring latch, which must be held back with the handle or
the mechanical key to give access to the interior. Later, when the door is
closed again, the lock will automatically shoot the bolts.
Mode 3: when the command to open is given, the lock withdraws the
bolts and holds back the spring latch, giving access to the interior. Once it
has opened the lock and the door, the spring latch will be released. Later,
when the door is closed again, the lock will not automatically shoot the
bolts. This means that the lock must be closed mechanically.
Mode 4: when the command to open is given, the lock withdraws the
bolts but not the spring latch, which must be held back with the handle or
the mechanical key to give access to the interior. Later, when the door is
closed again, the lock will not automatically shoot the bolts. This means
that the lock must be closed mechanically.
Mode 5: when the command to open is given, the lock withdraws the
spring latch only, giving access to the interior. In this functioning mode, the
bolts can only be opened and closed using the mechanical key in the cylin-
der.
NOTE:
you can monitor and check the condition of your door's functions at any
moment: all you have to do is press the green and black keys on the in-
ternal plaque
at the same time: the buzzer will emit a number of tones
2
(beeps) equivalent to the mode chosen from the list on this page.
HOW IT WORKS
(fig. 4)), the lock will open and
1
FIG.4
FIG.5
8
Advertisement
