Advertisement
To definitively cancel ONE or MORE entrance codes, you must:
access the "programming" facility
p
A. with the door open, keep your finger pressed on spring latch
the master code on the keyboard
B. the acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the "programming" mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C. Keeping the spring latch
must be cancelled followed by the # key (fig. 10). The buzzer will confirm
each code eliminated from the electronic memory with 3 brief beeps.
release the pressure on the spring latch
P
To definitively cancel ALL the entrance codes (total reset), you must:
access the "programming" facility
p
A. with the door open, keep your finger pressed on spring latch
the master code on the keyboard
B. the acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the "programming" mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C. Keeping the spring latch
keys located on the internal plaque
onds. The buzzer will emit one long beep to confirm.
This operation also simultaneously deletes all the TAGs and any re-
mote-controls being used.
release the pressure on the spring latch
P
BASIC PROGRAMMING
, followed by the # key (fig. 10).
1A
constantly pressed, digit the numeric code that
5
to exit the programming mode.
5
, followed by the # key (fig. 10).
1A
constantly pressed, press the green and black
5
(fig. 2) together for at least two sec-
2
to exit the programming mode.
5
and press
5
and press
5
FIG.10
FIG.2
19
Advertisement
