Advertisement
The FIAM x1R electronic key works very simply:
Pressing your personal entrance code on the keyboard
# key, (fig. 11)will open the lock and you will be able to enter the premises.
The lock will automatically lock up when you close the door again, as long as
this functional mode has been provided.
There are various options for leaving the premises.
• pressing the green key located on the internal plaque (Fig. 5)
• pressing a remote key (optional) which can be located at a distance from
the door (for example, the interphone key or an ordinary button)
• using the mechanical key
NOTE:
Please remember that the FIAM x1R electronic lock can always work at any
time, even if there are problems, both from the inside and outside by using
the mechanical key.
FUNCTIONAL METHODS
The function and service of the FIAM x1R electronic lock can be programmed
in five different modes:
Mode 1: after the opening command has been given the lock draws back the
bolts and holds back the spring latch for you to enter. The spring latch is re-
leased once it has opened the lock and the door. The lock will automatically
draw the bolts after the door has closed.
Mode 2: after the opening command has been given the lock draws back the
bolts but not the spring latch, which must be drawn back by a handle or me-
chanical key for you to enter. The lock will automatically draw the bolts after
the door has closed.
Mode 3: after the opening command has been given the lock draws back the
bolts and holds back the spring latch for you to enter. The spring latch is re-
leased once it has opened the lock and the door. The lock will NOT auto-
matically draw the bolts after the door has closed. The lock must therefore be
closed mechanically
Mode 4: after the opening command has been given the lock draws back the
bolts but not the spring latch which must be drawn back by a handle or me-
chanical key for you to enter. The lock will NOT automatically draw the bolts
after the door has closed. The lock must therefore be closed mechanically.
Mode 5: after the opening command has been given the lock draws back and
holds the spring latch only for you to enter. The bolts can only be opened
and closed using the mechanical cylinder key in this functional mode.
NOTE:
you can find out and check the working conditions of your door at any time
by pressing the green and black keys on the internal plaque
buzzer will emit the same number of beeps as the number of the modali-
ties listed in this page.
HOW IT WORKS
, followed by the
1A
together; the
2
FIG.11
FIG.5
16
Advertisement
