Advertisement
To re-enable ALL the radio controls you must:
access the "programming" facility
p
A. with the door open, keep your finger pressed on spring latch
the TAG
(or "master" numeric code) near to the receiver located on the
4
external plaque
(fig. 1).
1
B. The acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the "programming" mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C. Keeping the spring latch
ed on the internal plaque
emits two short beeps.
All the radio controls stored in the electronic memory are now re-enabled
to open the lock.
This operation also simultaneously re-enables any TAG and numer-
ic code being used.
release the pressure on the spring latch
P
BASIC PROGRAMMING
constantly pressed, press the black key locat-
5
(fig. 3) for at least one second until the buzzer
2
to exit the programming mode.
5
and place
5
FIG.1
FIG.3
24
Advertisement
