Advertisement
SAFETY BLOCK FOR THE KEYS
The keys on the internal plaque which are normally used for opening (green)
or closing (black) the door with the motor driven lock, can be rendered in-
active.
This is to prevent it from being accidentally or unwantedly opened making
your home less safe. For example any children in the house could be a cause
for compromising safety.
To deactivate the keys:
A. press the green and black keys on the internal plaque
er for at least ten seconds.
B. releasing the keys, the buttons are now disactivated.
To reactivate the keys:
A. press the green and black keys on the internal plaque
er for at least ten seconds.
B. Releasing the keys, the buttons are reactivated to normal working con-
ditions.
Your door with its FIAM x1R electronic lock will work with alkaline cell bat-
teries or will be powered by buffer batteries rechargeable from the mains, de-
pending on the system installed by your installer.
In both cases, the cell batteries and batteries are anyhow housed on the
door and you only have to loosen the screws located on the front of the
battery holder
, and carefully remove it, if it is in need of replacement or
3
maintenance (fig. 8).
Strictly follow the instructions and technical details given further on in this
manual to replace cell batteries and batteries and then put the battery hold-
er back into place taking care not to damage the wiring and fix by its screws.
Alkaline batteries:
Rechargeable batteries: 1,2V Ni-Mh Type D
Fiam consiglia l'utilizzo di pile
BASIC PROGRAMMING
BATTERIES
1,5V Ni-Cd Type D
(fig. 7) togeth-
2
(fig. 7) togeth-
2
FIG.7
FIG.8
20
Advertisement
