Advertisement
To definitively delete ONE or MORE radio controls, you must:
access the "programming" facility
p
A. with the door open, keep your finger pressed on spring latch
the TAG
(or "master" numeric code) near to the receiver located on the
4
external plaque
(fig. 1).
1
B. The acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the "programming" mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C. Keeping the spring latch
control to delete. Repeat the operation for any other radio controls to be
deleted. The buzzer will confirm each radio control eliminated from the
electronic memory with three short beeps.
release the pressure on the spring latch
P
To definitively cancel ALL the radio controls (total reset), you must:
access the "programming" facility
p
A. with the door open, keep your finger pressed on spring latch
the TAG
(or "master" numeric code) near to the receiver located on the
4
external plaque
(fig. 1).
1
B. The acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the "programming" mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C. Keeping the spring latch
keys located on the internal plaque
onds. The buzzer will emit one long beep to confirm.
This operation also simultaneously deletes all the TAGs and numer-
ic codes being used.
release the pressure on the spring latch
P
BASIC PROGRAMMING
constantly pressed, press key 6.1 on the radio
5
to exit the programming mode.
5
constantly pressed, press the green and black
5
(fig. 2) together for at least two sec-
2
to exit the programming mode.
5
and place
5
and place
5
FIG.1
FIG.2
25
Advertisement
