Indicator "SPEED AVG" - Average speed
This function indicates vehicle average speed. The
calculation considers the distance and time since Trip
1 was last reset. When Trip 1 is reset, the value is
reset and the first value available is displayed 10
seconds after the reset. During the first 10 seconds,
when the value is not yet available, the display will
show a string of dashes "- -.-".
The active calculation phase occurs when the engine
is running even if the motorcycle is stopped
(moments when the motorcycle is not moving and
the engine is OFF are not considered). The calculated
value is then displayed increased by 5% to be aligned
with vehicle speed indication.
It is possible to change the units of
measurement of "speed" (and "distance" travelled)
from Km/h (and Km) to mph (and miles) through the
Setting menu, using the "SET UNITS" Function.