Main Maintenance Operations; Change The Air Filter; Check And Top Up The Coolant Level; Check Brake And Clutch Fluid Level - Ducati DIAVEL Owner's Manual

Diavel series
Hide thumbs Also See for DIAVEL:
Table of Contents

Advertisement

Main maintenance operations

Change the air filter

Important
Have the air filter maintenance performed at a
Ducati Dealer or authorised Service Centre.

Check and top up the coolant level

Check coolant level in the expansion tank on the right
side of the vehicle. Steer the handlebar completely to
the left and check that the level is between the MIN
and MAX marks on the side of the expansion
reservoir. Top up if the level is below the MIN mark.
Unscrew the filler plug (1) and add ENI Agip
Permanent Spezial antifreeze, which is not to be
diluted, up to MAX level.
Refit the plug (1).
This type of mixture ensures the best operating
conditions (the coolant starts to freeze at -20 °C/-4 °F).
Cooling circuit capacity: 2.5 cu. dm (litres).
188
1
Warning
Place the motorcycle upright on a flat surface
and make sure the engine is cold before proceeding.

Check brake and clutch fluid level

The levels should not fall below the MIN marks on the
respective reservoirs.
If level drops below the limit, air might get into the
circuit and affect the operation of the system
involved.
Brake and clutch fluid must be topped up and
changed at the intervals specified in the scheduled
MAX
MIN
Fig. 137

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diavel carbon

Table of Contents