Download  Print this page

Light Control - Ducati DIAVEL Owner's Manual

Diavel series.
Hide thumbs

Advertisement

Light control

Headlight control
This function allows you to reduce current
consumption from the battery, by automatically
managing headlight switching-off.
At Key-On, the high beam and low beam lights are
off. When the engine is started, the low beam lights
turn on automatically; from this moment, "normal"
operation is activated: it will be possible to switch
from low beam to high beam (using button 3) or
operate the "FLASH" signal (using button 3).
If engine is not started upon key-on, it is anyway
possible to switch the lights on by pushing the button
on the LH high/low beam switch (button 3); press it
once to turn on the low beam; from this moment, the
same button can be used to switch on (and off) the
high beam light (if the engine is not started within 60
seconds, the low beam or high beam light that was
turned on will turn off).
126
If the headlight was turned on before starting the
engine with the procedure described above, the
headlight turns off automatically when starting the
vehicle and will turn on again when the engine has
been completely started.
3
Fig. 73

Advertisement

Table of Contents

This manual is also suitable for:

Diavel carbon

Comments to this Manuals

Symbols: 0
Latest comments: