PIN CODE activation function
To access the function it is necessary to view the
"setting" menu page 73, use button (1) or (2) to select
the "PIN CODE" function and press reset button (4) to
go to next page.
If "MODIFY PIN CODE" appears when
accessing this function, this means that there is
already a stored PIN and therefore the function is
When accessing the function, if "INSERT NEW PIN
CODE" and four dashes "- - - -" appear in green on the
round display, it means that no PIN CODE is present;
now enter a 4 digit code.
Entering the code:
Press the reset button (4).
each time you press the button (2) the displayed
number increases from "0" to "9" and then returns to
"0"; to confirm the number, press the reset button (4).
Repeat the procedure until inserting the fourth digit.
To highlight the "MEMORY" indication, press the
reset button (4) again.
To store the entered PIN, press the reset button (4)
for 3 seconds with "MEMORY" indication highlighted
in green. As a confirmation of PIN storage, the display
will show the message "MEMORIZED" for about 2
seconds and then automatically highlight "EXIT"
From this moment, "MODIFY PIN CODE" will be
displayed when accessing the "PIN CODE" function
and the PIN can be changed again as many times as
necessary (without limits).
To exit the setting function, press the reset button (4)
when "EXIT" is highlighted.