Quick Start; Debug Port Connection; Debug Port Setting - Advantech RSB-4220 User Manual

3.5" sbc with ti sitara am3352 cortex a8 single-core 1ghz high-performance processor

Hide thumbs Also See for RSB-4220:

Table of Contents

2.4

Quick Start

2.4.1

Connect debug port cable to the RSB-4220's debug port.

Connect the other end of the debug cable to a USB-to-RS-232 cable connected

to your PC.

2.4.2

RSB-4220 supports communication with a host server (Windows or Linux) via serial

cables. Standard serial communication programs, such as HyperTerminal, Tera Term

or PuTTY, can be used for this purpose. The example below demonstrates the serial

terminal setup process, using HyperTerminal on a Windows host.

Connect RSB-4220 to your Windows PC via a serial cable.

Open HyperTerminal on your Windows PC, and select the settings shown in Fig-

ure 2-7.

After the bootloader is programmed on the SD card, insert the power adapter

connector into the DC jack on RSB-4220 to power up the board. The terminal

screen will display the bootloader prompt.

Figure 2.17 HyperTerminal Settings for Terminal Setup

RSB-4220 User Manual

Table of Contents