Table of Contents
Advertisement
Inventory
The following is a list of items shipped with your
tool. Before beginning setup, lay these items out
and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
A
B
Figure 3. T1240 inventory.
Description
A. Table and Fence Assembly ........................ 1
B. Table Legs .................................................. 2
C. Router Bit Guard ........................................ 1
D. Hold-Downs ................................................ 2
E. Hold-Down Brackets ................................... 2
F.
Hardware Bag (not shown)
— Knob Bolts M5-.8 x 12 ............................ 2
— Flat Washers 5mm.................................. 2
— Flat Head Screws M8-1.25 x 50 ............. 4
— Flat Washers 8mm .................................. 4
— Hex Nuts M8-1.25 ................................... 4
NOTICE
If you cannot find an item on this list,
carefully check around/inside the tool and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
-10-
C
D
E
Qty
Site Considerations
Workbench Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your tool. Some
workbenches may require additional reinforce-
ment to support the weight of the tool and work-
piece materials.
Placement Location
Consider anticipated workpiece sizes and addi-
tional space needed for auxiliary stands, work
tables, or other machinery when establishing a
location for this tool in the shop. Below is the
minimum amount of space needed for the tool.
16
/
"
3
4
Figure 4. Minimum working clearances.
Children and visitors may
be seriously injured if un-
supervised around this tool.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Model T1240 (Mfd. Since 12/17)
15
/
"
3
4
Advertisement
Table of Contents
