Table of Contents
Advertisement
This tool presents serious
injury hazards to untrained
users. Read through this
entire manual to become
familiar with the controls
and
using the tool!
Wear safety glasses during
the entire setup process!
Unpacking
This tool was carefully packaged for safe trans-
port. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the tool and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your tool later.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
tool. Discard immediately.
Model T1240 (Mfd. Since 12/17)
SECTION 2: SETUP
operations
before
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this tool.
Description
•
Phillips Screwdriver #2 ............................... 1
•
Phillips Screwdriver #4 ............................... 1
•
Open-End Wrench 13mm ........................... 1
•
Drill Press or Hand Drill w/Guide ................ 1
•
Drill Bits (Variable) ................................1 Ea.
•
Center Punch ............................................. 1
•
Pliers........................................................... 1
•
Erasable Marker ......................................... 1
•
Ruler 12" ..................................................... 1
•
Shop Vacuum w/1
1
Qty
⁄
" Adapter ..................... 1
2
-9-
Advertisement
Table of Contents
