Inventory - Grizzly G0798 Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 2)
A. Main Housing (Not Shown) ........................ 1
B. Suction Panels ........................................... 2
C. Handles ...................................................... 2
D. Hardware .................................................... 2
—Phillips Head Screws M6-1 x 15 ............. 4
—Flange Screws M5-.8 x 10 .................... 16
—Star Knobs .............................................. 2
E. Foot Pad Assemblies .................................
Model G0798 (Mfd. Since 4/17)
B
E
Qty
Figure 2. Parts and hardware inventory.
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
6
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
D
NOTICE
C
-13-