Grizzly Panther T10001 Instruction Sheet

MODEL T10001
5 Shelf Unit
INSTRUCTION SHEET

Specifications

Overall Size ................... 28 ⁄ "W x 10 ⁄ "D x 71"T
1 1
2 2
Shelf Size .................................28 ⁄ "W x 10 ⁄ "D
1 1
4 4
Number of Shelves ............................................ 5

Inventory

Qty
A. Support Bracket ........................................ 8
B. Nut ............................................................ 56
C. Bolt ........................................................... 56
D. Rail ............................................................. 4
E. Shelf ........................................................... 5
F.
Foot ............................................................ 4

Assembly

After unpacking your Model T10001 shelving unit,
perform an inventory of the parts. You will need
a #3 Phillips screwdriver and a 10mm wrench to
assemble the shelves.
Begin by loosely assembling the shelf unit with
the supplied nuts and bolts. Attach one side of
the rails, then the other, making sure that the
shelves are parallel to one another as shown in
the illustration on Page 2. Once the shelf unit is
assembled, attach the feet and place it upright on
a flat level surface, then tighten all of the bolts.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
COPYRIGHT © SEPTEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TJ9998 PRINTED IN CHINA