Controls & Components - Grizzly T1240 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this tool. Understanding these items
and how they work will help you understand the
rest of the manual and minimize your risk of injury
when operating this tool.
C
B
A
Figure 1. Router table controls (front).
A. Table. Flat surface for router operations.
B. Featherboard. Provides tension on workpiece
for smoother cuts and kickback prevention.
C. Mounting Plate. Plate used to attach router
to table.
D. Router Bit Guard. Clear guard provides
workpiece visibility and safety during router
operations.
E. Hold-Down (1 of 2). Provides additional
workpiece support and kickback protection
during router operations.
-4-
manual BEFORE
D
E
F
F. Miter Gauge. Provides angled cutting up to
60º left and right.
I
H
G
M
Figure 2. Router table controls (rear).
G. Fence Base. Provides a platform for fence
boards, router bit guard, hold-downs, and
dust port.
H. Fence Board/Hold-Down Lock (1 of 2).
Tighten and loosen to adjust fence boards
and hold-downs.
I. Infeed Fence Board. Provides workpiece
support during router operations.
J. Table Slot. Provides channel for miter gauge
and featherboard.
K. Outfeed Fence Board. Provides workpiece
support during router operations.
L. Fence Lock (1 of 2). Tighten and loosen
fence base for front-to-rear adjustment.
M. Dust Port. 1 ⁄ " dust port connects to shop
1
2
vacuum for dust collection.
Model T1240 (Mfd. Since 12/17)
J
K
L