Wi-Fi Connection - Monoprice 30526 User Manual

Wi-Fi Connection

Perform the following steps to connect your PC to the Inventor printer using a Wi-Fi®
connection. Note that printing from an SD™ card is disabled when Wi-Fi is enabled.
1. Power on the printer and your computer.
2. On the printer, select Tool > Setting > WIFI > WIFI ON.
3. Open your computer's wireless network settings and scan for available Wi-Fi®
signals. Select the Inventor1 entry, then click Connect.
4. Open your internet browser. Type 10.10.100.254 and press the Enter key on your
keyboard. Enter the username and password to login. The default username and
password are both admin. The control panel will appear after successful login.
5. Click the WiFi Set tab on the left, then set the WiFi Work Mode to AP mode or STA
mode, then click Restart to make the changes take effect.
AP mode configures the printer's Wi-Fi® radio to act as a Wi-Fi Hotspot/Access
Point (AP). You then set your computer's network settings to directly connect to
the printer's Wi-Fi AP, rather than your regular Wi-Fi AP.
50