Wi-Fi Setup - Monoprice MP Mini Delta User Manual

16. Press the top button twice to highlight the Print option, then press the center
button. The printer will read the contents of the microSD
screen.
17. Use the top and bottom buttons to highlight the cat.gcode file, then press the
center button to start printing the model.
Congratulations, your 3D printer is setup and you are printing your first model!

WI-FI SETUP

You can connect the printer wirelessly to a 2.4Ghz Wi-Fi® network to print models from
your Android™ or iOS® phone or tablet. Perform the following steps to setup the Wi-Fi
connection for your device.
1. Download the free MP 3D Printer WiFi Connect app from the Google Play Store or
from iTunes, depending on which type of mobile device you have.
2. Disconnect the USB cable from the printer. You cannot use USB and Wi-Fi
connections at the same time.
3. Power on the printer.
4. Start the MP 3D Printer WiFi Connect app.
5. The SSID of your Wi-Fi network should be displayed on screen. If a different SSID is
displayed, open your device's Wi-Fi settings and select the appropriate Wi-Fi
network.
6. Enter your wireless password.
7. Use the printer's buttons to navigate to the Move menu.
8. Press and hold the center button for 3 seconds. Release the button when Smart
config started is displayed on screen.
9. Press the Connect to WiFi button on your mobile device. The connection will be
completed within 10 ~ 60 seconds and the message MP Mini Delta is now
connected to Wi-Fi will be displayed on your device's screen and the IP address will
be displayed at the top of the printer's LCD screen.
™
9
card and display them on