Unpacking - Monoprice 30526 User Manual

UNPACKING

1. Place the box on a flat, clean work surface. After opening the box, you can the Build
Tape, a Leveling Card, and this User's Manual.
2. Remove the top protective styrofoam piece, which contain the Inventor's lid. Set
this aside for now. The Inventor printer and Power Cord are revealed.
3. Lift the Inventor by its side openings and place it on a flat surface. You can now see
the Toolbox and USB Cable. Inside the Toolbox, you can find a Carving Knife, a
Scraper, a package of Grease, Tweezers, and a Screw Box. The Screw Box contains
an SD™ Card, some Screws, a Leveling Knob, and two PTFE Tubes.
17