Preheat Menu; Preheat Temperature Screen - Monoprice 30526 User Manual

Preheat Menu

The Preheat Menu is displayed by touching the Preheat button on the Top Menu.
 Touch the slider buttons to turn
extruder and platform heating on or off.
 Touch the target temperature buttons
to set the preheat temperature. The
default target print temperature for the
extruders is 230°C and 100°C for the
platform.
 Touch the Start button to start
preheating the extruder(s) and/or platform.
 Touch the Back button to return to the previous menu.

Preheat Temperature Screen

The Preheat Temperature Screen is displayed by touching a Temperature button on the
Preheat Menu.
 Touch the arrows above and below the
digits to increase or decrease that value.
 Touch the Yes button to save the
displayed temperature value and return
to the previous screen.
 Touch the No button to cancel any
changes and return to the previous
screen.
12