Using The Menu System; Unpacking, Assembly, And Setup - Monoprice extrusion i3 13860 User Manual

USING THE MENU SYSTEM

The Power Supply/Control Box features a knob and an LCD display. Throughout this manual
you will be asked to navigate the menu system and select specific menu entries. For
example, you may be told to select:
Quick Settings > Home All
To do this, first press the knob to activate the menu
system. Rotate the knob until the highlight is on the
Quick Settings entry, then press the knob to select it.
Next, rotate the knob until the Home All entry is
highlighted, then press the knob to select it.
Most menus have a Back option to return to the
previous menu. If no option is available, pressing the
knob will often return to the previous menu.
Additionally, the control box will automatically exit
the menus and return to the home screen after about 30 seconds of inactivity.

UNPACKING, ASSEMBLY, AND SETUP

1. Open the box, remove the cardboard accessories box, then remove the top layer
foam insert.
6