Extruder Adjust Screen; Unpacking - Monoprice 30525 User Manual

Extruder Adjust Screen

The Extruder Adjust Screen is displayed by touching the Extruder Calibration label on the
Setting Menu.
 Touch the - button to increase the
distance between the extruder nozzle
and the build plate in the home
position.
 Touch the + button to decrease the
distance between the extruder nozzle
and the build plate in the home
position.
 Touch the OK button save your changes.
 Touch the Back button to return to the previous menu.

UNPACKING

1. Place the box on a flat, clean work surface.
2. Open the box. Grab the printer by the two handles and lift it out of the box, then
place it on the work surface.
18