Emerson Clarity II Instruction Manual page 65

MODEL CLARITY II
SN XXXppm/NTU
Low lim
XXX.XNTU
Out1 SN 14.67mA
Out2 SN 14.67mA
Solu Comp II
Version 3.13
5. This screen appears only if the analyzer was configured to convert the
turbidity reading to TSS. The first line is the slope of the calibration curve.
The second line is the lower limit for the turbidity measurement. A meas-
ured turbidity below this value will return a negative TSS value.
6. This screen shows the value of the analog output corresponding to the
displayed value and the scaling programmed in Section 5.3.4.
7. This screen shows the software version.
SECTION 8.0
TROUBLESHOOTING