Emerson Clarity II Instruction Manual page 6

This manual contains instructions for installation and operation of the Clarity II Model
T1055 Turbidimeter.
The following list provides notes concerning all revisions of this document.
Rev. Level
A
B
C
D
E
F
G
H
I
About This Document
Date Notes
5/04 This is the CD-launch version containing only installation
information.
6/04 This is the electronic launch version, which added more detail
instructions for programming and troubleshooting.
11/04 This is the initial full release of the product manual. The manual
has been reformatted to reflect the Emerson documentation
style and updated to reflect any changes in the product offering.
1/05 Updated ordering matrix, added lamp calibration section,
revised information screens section.
3/05 Revised panel mount drawing.
7/05 Revised text on pp. 32 & 34; revised text & figure on page 46.
10/05 Revised text on pp 9 & 47 and drawings on pp. 10 & 48 to
show new molded debubbler; revised debubbler specifications.
Addition of agency-required warnings to pp. 12, 43, 45, & 48.
1/06 Revised Analyzer Enclosure Specifications - page 2.
2/06 Added FM and CSA Non-Incendive approval ratings to
Specifications - Analyzer, page 2.
Added FM and CSA Non-Incendive installation control drawings
to section 3.0 - Wiring, pp. 12-15.