Connecting The Base Station To The Mains Power Supply; Pairing And Charging The Headset Before First Use - Sennheiser SDW 10 HS User Manual

8 ConneCtInG tHe BAse stAtIon

Connecting the base station to the mains power supply

1
Connect the plug of the power supply unit to the
DC socket (marked yellow).
Disconnecting the base station from the mains power supply
Unplug the power supply unit from the wall socket, if the product is not used for extended periods of time.

Pairing and charging the headset before first use

Charge the rechargeable battery for at least 20 minutes before using it for the first time.
A complete charging process takes about 60 minutes (see page 43).
1
Place the headset into the magnetic holder of the base
station.
the Headset battery status LeDs on the base station
indicate the charge status.
i During the first charging process and after long periods of non-use, it may take up to 5 minutes until the headset
LeD lights up.
SDW 5000 series headset system
2
Connect the power supply unit to a wall socket.
the LeD lights up red.
see page 11 for supported features with and without
power supply connection.
2
If the headset and base station are not paired, the
headset LeD flashes blue and red shortly. the LeD turns
blue when pairing is complete and the headset will start
charging.
3x