Connecting The Base Station To Bluetooth Devices - Btd 800 Usb Only - Sennheiser SDW 10 HS User Manual

12 ConneCtInG tHe BAse stAtIon
Connecting the base station to Bluetooth devices – BTD 800 USB only
With the dongle BtD 800 UsB you can either connect mobile phones or headsets via Bluetooth to the base station.
the dongle complies with the Bluetooth 4.2 standard. Pair Bluetooth devices that support the "hands free profile" (HFP),
the "headset profile" (HsP) or the "advanced audio distribution profile" (A2DP).
the dongle can save up to eight paired Bluetooth devices.
If you pair a ninth device, the saved connection profile of
the least used Bluetooth device will be overwritten. If you
want to re-establish a connection with this device, you
have to pair the devices again.
Connecting the Bluetooth dongle to the base station
SDW 5000 series headset system
After switch-on, the dongle automatically tries to
connect to the two last connected Bluetooth devices. If
two devices are used, either two mobile phones or two
headsets can be connected to the dongle – mobile phone
and Bluetooth headset cannot be combined. You can only
connect a third Bluetooth device after having switched
off the first or the second Bluetooth device.
the BtD 800 UsB dongle is supplied together with the
sDW 50X4 and sDW 50X6 bundles and also available as
an accessory.
Plug the dongle into the UsB port of the base station.
Follow the instructions in one of the two next chapters.
new unused dongles switch automatically to pairing
mode. the LeD alternately flashes blue and red.