Sharing A Workplace; Using The Headset With A Third Party Base Station (Dect-Gap Telephone) - Sennheiser SDW 10 HS User Manual

45

sHARInG A WoRkPLACe

Sharing a workplace
the sDW 5000 headsets and base stations are compatible with each other. If you share a workplace, you can use one
base station with different headsets.
Fredrik
TIM
Place the headset to be used into the magnetic holder
of the base station.
the Headset LeD alternately flashes blue/red and
flashes blue twice if pairing is successful. the headset
is ready for use.

Using the headset with a third party base station (DECT-GAP telephone)

If pairing is not successful within 60 seconds, the headset switches back to standby mode.
to pair the headset to a sDW 5000 series base station, after having paired it to a GAP enabled device:
Place the headset into the magnetic holder of the base station.
In this case, the pairing will not be initiated the first time, therefore:
Undock the headset and re-dock it again.
the headset LeD flashes blue/red shortly and turns blue when pairing is complete. the headset will start charging.
SDW 5000 series headset system
Fredrik TIM
5s
Fredrik
2x
Charge the headsets that are not in use with the
optional headset charger CH 30 (see page 43).
Place the headset at a maximum distance of 1 m from
the third party base station.
Press and hold the headset's hook button and mute
button simultaneously for 5 seconds.
the headset switches to a special pairing mode and
the Headset LeD flashes blue/red alternately.
set the third party base station to a special pairing
mode (see the instruction manual of the third party
base station). the default code for the headset is
"0000".
the headset pairs with the third party base station. If
pairing is successful, the Headset LeD switches off.
CH 30