Adjusting The Audio Signal For Desk Phones Using The Abc Switch - Sdw 5 Bs Only; Adjusting The Transmission Volume - Sennheiser SDW 10 HS User Manual

27 ConFIGURInG tHe HeADset sYsteM
Adjusting the audio signal for desk phones using the ABC switch – SDW 5 BS only
1
Put on the headset.
3
Lift the handset.
You hear a dial tone.

Adjusting the transmission volume

Adjusting the microphone volume for the connected desk phone – SDW 5 BS only
By default, the microphone volume control is set to 4. this setting is suitable for most telephones.
1
Make a call to someone who will help you find the
correct sensitivity setting for your microphone
(see page 31).
Adjusting the microphone volume for the connected computer
Activate the option "Automatically adjust microphone sensitivity" in the settings of your softphone – if available.
Adjust the microphone sensitivity via your operating system, so that the other party can hear you at a comfortable
level (see Help function of your operating system).
SDW 5000 series headset system
2
S1 S2
Press the button on the base station.
4
1 2 3 4 5 6 7 8
set the ABC switch to the position A,
can hear a clear dial tone in the headset.
2
turn the microphone volume control so that the other
party can hear you at a comfortable level.
B or C so that you
S1 S2
1 2 3 4 5 6 7 8