Info Menu; Standard Info Menu - ResMed H5i Clinical Manual

Parameter
Configuration
Language
Restore factory
defaults
Erase data
Temperature units
*[
Asia Pacific]
Reminder menu
You can access reminders from the Clinical Menu > Options. From the REMINDERS screen, scroll down
to the submenus to set a number of different types of messages.
For a list of each of the reminders available and their default settings, see the table on the previous page.

Info menu

Designed to provide you with information about compliance, therapy and settings, the Info menu consists
of: Standard Info menu; and Advanced Info menu.

Standard Info menu

From the Standard Info menu, patients can check their sleep quality, sleep report and service information.
18
Modes Default
CPAP ASV
English
ü ü
ü ü
ü ü
F
o
ü ü
[ C]*
o
You can use the Reminder menu to alert a patient to specific events, such as
when to replace their mask (shown on the left) or when to insert an SD card.
When a reminder is due, a message is displayed on the LCD and remains
while the device is not delivering therapy. The backlight on the LCD flashes
when a message is displayed.
If more than one reminder for a patient is scheduled for the same date, all
scheduled reminders will be displayed.
Patients can clear each message by pressing any key (except the Start/Stop
button).
Sleep Quality—On
When Sleep Quality is set to On (via Setup > Clinical Setup > Options), data
on previous usage (up to 365 days of data), mask-fit and AHI can be viewed.
Range Description
English / Français Sets the display language.
/ Español /
Note: Not all languages are
Português
available in all regions.
简体中文 /
繁體中文
Yes / No Resets machine default settings
(except for language, date and
time).
Yes / No Allows the clinician to erase all
data stored in the unit and SD
card (except for machine hours).
Settings, date and time are not
affected.
F / C Sets temperature units.
o o