Vpap Adapt Technical Specifications - ResMed H5i Clinical Manual

VPAP Adapt technical specifications

Pressure and Operating pressure range (measured at the mask): 4–20 cm H
cm H
flow state
Maximum single fault steady state pressure: 30 cm H
for > 6 sec; 40 cm H
Mode reading CPAP mode
Set pressure: 4 to 20 cm H
ASV mode
EPAP: 4 to 15 cm H
Sound: Sound pressure level (CPAP mode)
DECLARED
DUAL-NUMBER
NOISE
EMISSION
VALUES in
accordance with
with either SlimLine tube or
ISO 4871:1996
Sound power level (CPAP mode)
with either SlimLine tube or
Physical Dimensions (L x W x H): 6.0" x 5.5" x 3.4" (153 mm x 140 mm x 86 mm)
Weight: 1.84 lb (835 g)
Housing construction: Flame retardant engineering thermoplastic
Air outlet: 22 mm conical air outlet (complies with ISO 5356-1:2004)
Air filter Standard: Polyester non-woven fiber
Hypoallergenic: Acrylic and polypropylene fibers in a polypropylene carrier
Supplemental Recommended maximum supplemental oxygen flow: 15 L/min
oxygen
O (ASV)
2
O - if pressure exceeded for >1 sec
2
2
O; Max PS: 8 to 16 cm H
2
with SlimLine tube: 26 dBA with uncertainty of 2 dBA as measured
with Standard tube: 27 dBA with uncertainty of 2 dBA as measured
Standard tube and H5i:
with SlimLine tube: 34 dBA with uncertainty of 2 dBA as measured
with Standard tube: 35 dBA with uncertainty of 2 dBA as measured
Standard tube and H5i:
O
O; Min PS: 3 to 6 cm H
2
according to ISO 17510-1:2007
according to ISO 17510-1:2007
28 dBA with uncertainty of 2 dBA as measured
according to ISO 17510-1:2007
according to ISO 17510-1:2007
according to ISO 17510-1:2007
36 dBA with uncertainty of 2 dBA as measured
according to ISO 17510-1:2007
O (CPAP); 4–25
2
O - if pressure exceeded
2
O
2
29
English