Safety Instructions - Hayward TriStar VS 900 Omni Operation Manual

Vs omni series pool automation control
Hide thumbs Also See for TriStar VS 900 Omni:
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
When using this electrical equipment, basic safety precautions should always be followed, includ-
ing the following:
READ AND FOLLOW ALL INSTRUCTIONS
WARNING: Disconnect all AC power during installation.
WARNING: Water in excess of 100 degrees Fahrenheit may be hazardous to your health.
WARNING: To reduce the risk of injury, do not permit children to use this product unless they
are closely supervised at all times.
WARNING: Do not use the VS Omni to control fire pits or related equipment.
A green colored terminal marked "Grounding" is located inside the wiring compartment. To
reduce the risk of electric shock, this terminal must be connected to the grounding means
provided in the electric supply service panel with a continuous copper wire equivalent in size
to the circuit conductors supplying the equipment.
One bonding lug for US models (two for Canadian models) is provided on the external
surface. To reduce the risk of electric shock, connect the local common bonding grid in the
area of the swimming pool, spa, or hot tub to these terminals with an insulated or bare copper
conductor not smaller than 8 AWG US / 6 AWG Canada.
All field installed metal components such as rails, ladders, drains, or other similar hardware
within 3 meters of the pool, spa or hot tub shall be bonded to the equipment grounding bus
with copper conductors not smaller than 8 AWG US / 6 AWG Canada.
1
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
SAVE THESE INSTRUCTIONS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents