Safety Precautions; General; Hazardous Materials - Beijer Electronics BoX2 extreme Installation Manual

1

Safety Precautions

Both the installer and the owner and/or operator of the operator panel must read
and understand this installation manual.
1.1

General

Read the safety precautions carefully.
•
Check the delivery for transportation damage. If damage is found, notify the
•
supplier as soon as possible.
Do not use the operator panel in an environment with high explosive hazards.
•
The supplier is not responsible for modified, altered or reconstructed
•
equipment.
Use only parts and accessories manufactured according to specifications of
•
the supplier.
Read the installation and operating instructions carefully before installing,
•
using or repairing the operator panel.
Never allow fluids, metal filings or wiring debris to enter any openings in the
•
operator panel. This may cause fire or electrical shock.
Only qualified personnel may operate the operator panel.
•
The figures in this manual serve an illustrative purpose. Because of the many
•
variables associated with any particular installation, the supplier cannot
assume responsibility for actual use based on the figures.
The supplier neither guarantees that the operator panel is suitable for your
•
particular application, nor assumes responsibility for your product design,
installation or operation.
It is recommended to turn on and shut down the operator panel at least once
•
before installing any components/cards or before connecting the operator
panel to external devices; for example serial devices.
For Marine panels only:
•
The operator panel must be installed and operated as described in this
–
document to meet this certification.
Observe precautions for handling electrostatic discharge sensitive devices
–
1.2

Hazardous Materials

Part description
零件描述
PCB and electronic
components
PCB 和电子元件
O: Indicates that this toxic or hazardous substance contained in all of the homogenous
materials for this part is below the limit requirement in SJ/T 11363–2014.
O： 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11363–2014 规定的限
量要求以下。
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogenous materials for this part is above the limit requirement in SJ/T 11363–2014.
Beijer Electronics, MAEN276
Toxic and hazardous materials or elements
有毒 和有 害的 材料 或元 素
Pb Hg Cd
X O O
Safety Precautions
Cr6+ PBB PBDE
O O O
7