Appendix D - Engineering Unit Menu - GE Masoneilan 12420 Instruction Manual & Safety Manual

APPENDIX D
SCREEN DESCRIPTION FOR ENGINEERING UNIT MENU
↓ ENG:%
UNIT:%
##.###
DECIMALS
LOWER REFERENCE VALUE Validate by pressing the * to set the lower level value expressed in industrial unit
UPPER REFERENCE VALUE
SAVE
↑ BACK
SCREEN DESCRIPTION FOR FILTERING MENU
FILTERING
DAMPING
DAMPING ON
DAMPING OFF
DAMPING:s
↑ BACK
SMART FILTERING
SMART FILTERING ON
SMART FILTERING OFF
WINDOW of
INTEGRATION : s
DEAD ZONE of
INTEGRATION : %
WINDOW of
VALIDATION
↑ BACK
® 2014 General Electric Company. All rights reserved.
Validate by pressing the * to enter the sub-menu related to the level variable setting in
engineering units.
Validate by pressing the * to select the desired engineering unit (%, cm, m, inch...) used to
express the level variable. Generally, the engineering unit is in %.
Validate by pressing the * to set the number of decimals after the dot.
corresponding to the Low Reference (REF L). Always set at 0 if unit is %. Value ranges from 0 to
value of UPPER REFERENCE VALUE.
Validate by pressing the * to set the higher level value expressed in industrial unit
corresponding to the High Reference (REF H). Always set at 100 if unit is %. Value ranges from
LOWER REFERENCE VALUE to 9999.9.
Validate by pressing the * to start the saving procedure of parameters previously entered in
the instrument memory.
Return to previous menu.
Validate by pressing the * to check the Filtering data.
Validate by pressing the * to check the Damping data.
Indicates first order Filtering function is activated.
Indicates first order Filtering function is not activated.
Indicates damping value adjusted in the Advanced Setup menu.
Return to previous menu.
Validate by pressing the * to check the Smart Filtering parameters.
Indicates the Smart Filtering function is activated.
Indicates the Smart Filtering function is not activated.
Indicates the Window of Integration value adjusted in the Advanced Setup menu.
Indicates the Dead Zone of Integration value adjusted in the Advanced Setup menu.
Indicates the Window of Validation value adjusted in the Advanced Setup menu.
Return to previous menu.
Masoneilan 12400 Series Transmitter/Controller Instruction Manual | 71