Appendix B - Basic Setup Menu - GE Masoneilan 12420 Instruction Manual & Safety Manual

APPENDIX B
SCREEN DESCRIPTION FOR BASIC SETUP MENU – 2/2
ZERO
SPAN
SAVE
CANCEL
CHANGE SPECIFIC
GRAVITY
SPECIFIC GRAVITY of
SERVICE
LOW SPECIFIC GRAVITY of
SERVICE
HIGH SPECIFIC GRAVITY of
SERVICE
SAVE
CANCEL
↑ BACK
64 | GE Oil & Gas
When displayed, empty the tank (or simulate) so that displacer is fully out of liquid. Wait
until the displacer is stable then press * to define the low reference (REF L).
When displayed, fill the tank (or simulate) so that displacer is fully immersed in liquid. Wait
until the displacer is stable then press * to define the high reference (REF H).
Validate by pressing the * to start the saving procedure of parameters previously entered
in the instrument memory.
Validate by pressing the * to cancel the parameters saving procedure.
Enter that function to set the Specific Gravity of Service in case it is different from the
Specific Gravity of Calibration.
Validate by pressing the * to set the Specific Gravity of the liquid of service if it is different
from the Specific Gravity of Calibration. Settable value ranges from 0.001 to 10.
Used in case of an interface instrument. Validate by pressing the * to set the Specific
Gravity of the lighter liquid used in service if it is different from LSG CAL. Settable values
range from 0.001 to the value of HSG SER.
Used in case of an interface instrument. Validate by pressing the * to set the Specific
Gravity of the heavier liquid in service if it is different from HSG CAL. Settable values range
from LSG SER to 10.0.
Validate by pressing the * to start the saving procedure of configuration parameters
previously entered in the instrument memory.
Validate by pressing the * to cancel the parameters saving procedure.
Return to previous menu.
® 2014 General Electric Company. All rights reserved.