How To Configure The Switch To Perform Dhcp Service In A Vlan - ZyXEL Communications GS2210 series Handbook

2.3 How to configure the switch to perform DHCP service in a
VLAN
The example shows administrators how to configure the switch to
provide dynamic IP addresses to hosts in each VLANs.
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using XGS4600-32 (Firmware Version: V4.50).
This feature is for L3 capable switches only.
Perform DHCP service in different VLAN
www.zyxel.com
81/215