Configure The Classifier - ZyXEL Communications GS2210 series Handbook

3.5.2 Configure the Classifier

1 Set up the Classifier on Switch-2: Go to Menu > Advanced
Application > Classifier > Classifier Configuration. Set up 4
Classifier: Classifier for download and upload in VALN 10 and
VLAN 20. Therefore, there are total 4 Classifiers.
Note:
ACL causes traffic that matches the criteria of a Classifier to follow its
corresponding Policy Rule.
2 The Classifier for download traffic in VLAN 10: Check the
"Active" box and key in the Name. Set Layer 3 > Destination as
192.168.10.0/24 (Means the destination is in VLAN 10) and
Source as 192.168.1. 100/32 (Means the source is FTPServer).
Press "Add".
www.zyxel.com
120/215