Configure Switch - ZyXEL Communications GS2210 series Handbook

6.1.2 Configure Switch

1 Enter the web GUI and go to Menu > Advanced Application >
LLDP > LLDP Configuration. Make sure that the LLDP
configuration is active.
2 Enter web GUI and go to Menu > Advanced Application >
LLDP > LLDP-MED Configuration. Check the "Network Policy"
on port 1 (the port that connects to the IP Phone).
3 Enter the web GUI and go to Menu > Advanced Application >
LLDP > LLDP-MED Network Policy. Key in the port number as 1
and the VLAN we want to assign the IP Phone to (VLAN 100)
and leave DSCP as "0". We can also set the Priority. Click
"Add".
www.zyxel.com
198/215