Configure Switch-2 - ZyXEL Communications GS2210 series Handbook

2.1.2 Configure Switch-2

1 Use AdministratorPC to set VLAN 1 in Switch-2: Port 3, 4 as
Normal port (this prevents VLAN 1 from broadcasting packets
to port 3, 4). Enter the web GUI and go to Menu > Advanced
Application > VLAN > VLAN Configuration > Static VLAN Setup
> VID > 1. Select port 3, 4 as Normal. Click "Add".
2 Use AdministratorPC to create VLAN 10 in Switch-2. Enter the
web GUI and go to Menu > Advanced Application > VLAN >
VLAN Configuration > Static VLAN Setup. Check the "ACTIVE"
box. Type the Name and VLAN Group ID=10. Select port 3, 5 as
Fixed and uncheck Tx Tagging (Untagged) on port 3 and
check Tx Tagging (tagged) on port 5. Click "Apply".
www.zyxel.com
69/215