How To Configure The Switch To Backup Events On A Syslog Server - ZyXEL Communications GS2210 series Handbook

1.6 How to configure the switch to backup events on a
SYSLOG server
The example shows administrators how to set up the switch to send
system log events to a remote syslog server.
Upload the syslog automatically to the server
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using XGS4600-32 (Firmware Version: V4.50).
www.zyxel.com
33/215